CUPG Copper Parallel Groove Clamp

Copper PG Clamp

CUPG Series Parallel Groove Connector

Application:

The CUPG parallel groove clamp was designed to connect two parallel bare conductors, which can be copper stranded or rods. The material is forged copper for copper-to-copper connection throughout the conductor range. It is also used for the tap-off connection of copper conductors.

Structure Feature:

1. The PG clamps have serrated transverse grooves for maximum conductor contact.

2. Stainless bolts and utilize Belleville washers to prevent thermal ratcheting under cyclic loads.

Datas:

Technical Parameters

Copper PG Clamp is an important component used on power transmission lines. It fixes, connects, and supports wires.

The following are the main applications of copper PG clamps:

1. Wire connection: Copper PG clamps are usually used to connect wires to ensure a good connection between wires for the stability and reliability of power transmission.
2. Insulator fixing: PG clamp connector can be used to fix insulators to pillars or beams of power transmission lines to ensure the stability and safety of the insulator.
3. Line support: In power transmission lines, copper parallel groove clamp connectors are also used to support power conductors to ensure the stability of the line and the reliability of the overall structure.
4. Protection device installation: Sometimes copper PG clamps are also used to install protective devices, such as guards or lightning arresters, to protect line equipment from the external environment or weather conditions.

In general, copper PG clamps play an important role in power transmission lines, ensuring the normal operation and safety of the lines.